OD-N9ZA Network Audio Terminal

Network Single Zone Control decoder can work with Universal PA 100V Line amplifier and speakers
Cost effective network PA System Solution
High speed ARM+DSP Processor and display screen to monitor & control
Line output to connect to the external amplifier
The acoustic control to the external amplifier
Maximum capacity to controlled 1000W Power Amplifier
Wide range of network Protocol such as TCP,UDP,IGMP,ICMP,ARP
Multiple options of Audio codec like ADPCM,MP3, MP2, PCM
With a built-in speaker and a microphone; available to make a full duplex talk and a broadcast to other terminals
Supported existing LAN/WAN Ethernet system, support over gateway and router
Power up time is <1sec
1x short-circuit output to control 24V forced power supply
19” Ready rack mount Installation design, Anti-corrosion protected Alluvium alloy

Description

Description

Model no OD-N9ZA
Specifications
Audio Input 1x MIC Input, 1x Aux Input
Audio Output 1x Line Out, 100V Line
Power Output 1 Port
Dispay Screen TFT 1.8”, LCD 128 x 160
Network Protocol TCP,UDP,IGMP,ICMP,ARP
Network Port RJ-45(10/100Mbps)
Audio Compression ADPCM,MP3, MP2, PCM
Audio Bitrate & Sampling 8kHz-44.1kHz, 8kbps ~ 320kbps
Audio Delay <30 ms
S/N Ratio ≥90dB, 20Hz-16KHz
Alarm 2x Dry Contact In, 2x Dry Contact Out
Power Input 200-240V AC, Fuse Protection
Power Consumption <10W
Working Temp. & Humidity -10 ℃ ~ 50 ℃,  ≤ 90%RH (Not condensing)
Mount 1U 19″ Rack Mount, Table Top
Enclosure & Color Full Metal, Black
Dimension & Weight 44(H) x 483(W) x 258(D) mm, <4.5Kg