OD-N9WAR 20W Network Wall Amplifier

20W Network wall class D amplifier
Built-in Audio Controller with 20Wclass-D amplification with power out 8 Ohms
Installed Microphone on the terminal to enable the monitor on-site activities from main control room
Support LAN/WAN Ethernet system, support over gateway and router
Priority Announcement programming network program, local mic input and local line input
1 Analog Audio output to connect External amplifier
Wide range of network Protocol such as TCP,UDP,IGMP,ICMP,ARP
Multiple options of Audio codec like ADPCM,MP3, MP2, PCM
Built In colorful 3 Line LCD Display, Infrared remote controller
Power up time is <1sec
less emission of the heat and higher efficiency
Wall Mount installation design

Description

Description

 

Model noOD-N9WAR
Specifications
Power Output2x10W (8 Ohms)
Audio Input1x MIC Input, 1x Aux Input
Audio Output1x Line out, 1x Speaker Out Low Impedance
Network ProtocolTCP,UDP,IGMP,ICMP,ARP
Network PortRJ-45(10/100Mbps)
Audio CompressionADPCM,MP3, MP2, PCM
Audio Bitrate & Sampling8kHz-44.1kHz, 16bit, 8kbps ~ 320kbps
Audio Delay <100 ms
S/N Ratio≥90dB, 20Hz-22KHz
Alarm1 x Dry Contact In, 1x Dry Contact Out
Power Input & ConsumptionDC 12V,  <25W
MountTable top, Wall Mount
Working Temp. & Humidity-10 ℃ ~ 50 ℃,  ≤ 90%RH (Not condensing)
Enclosure & ColorFull Metal, Silver
Dimension & Weight250(H) x 186(W) x 50(D) mm, <0.7Kg