OD-N932CS Channel selector & volume control
Supported with OD-NP9WA
Select 32 Program channel
15 levels of Volume Control
Powered by Wall Amplifier
Max Dis. 10M to Wall Amplifier
Related products
OD-NW60A 60W Wall Speaker
60W Network Wall Mount Loudspeaker
Integrated with Network audio decoding, amplifier and speaker
High speed ARM+DSP Processor
Hi-Fi linear array speakers and Class-D stereo power amplifiers
In Built loop detector to monitor remotely the health status
Wide range of network Protocol such as TCP,UDP,IGMP,ICMP,ARP
Multiple options of Audio codec like ADPCM,MP3, MP2, PCM
Wall Mount Installation Design
OD-N9WA Network 20W Wall Amplifier
20W Network wall class D amplifier
High speed ARM+DSP Processor
Built-in Audio Controller with 20Wclass-D amplification with power out 8 Ohms(60W Optional)
Remote configuration and up gradation
Support LAN/WAN Ethernet system, support over gateway and router
1 Analog Audio Input with Local volume Control
1 Analog Audio output to connect External amplifier
Wide range of network Protocol such as TCP,UDP,IGMP,ICMP,ARP
Multiple options of Audio codec like ADPCM,MP3, MP2, PCM
LED Indicators to shows the status offline, online system and many more
Power up time is <1sec
less emission of the heat and higher efficiency
Compact and Wall Mount installation design
OD-NA350 350W Network Mixer Amplifier
350W Network audio mixer Class D amplifier
Designed IP PA Amplifier for the small size multiple room application such as warehouse, hospital, school and office
Built-in Audio Controller and 350W Class D(constant voltage of 100V) amplification
Multiple music programs could be matrix distributed from server to different zones
Working with existing LAN/WAN network system, non-dedicated network system is needed
Power up time is <1sec, built In colorful 2 Line LCD Display
Support LAN/WAN, Ethernet system, support over gateway and router
Wide range of network Protocol such as TCP,UDP,IGMP,ICMP,ARP
Power up time is <1sec
Separate volume and tone control for each 5 inputs
VOX Priority override Input at Front panel MIC 1
Output priority level can be define from 5 sources, editable network program
Third party system integration by 0V alarm output port
less emission of the heat and higher efficiency
Automatic Standby power-saving mode when no signal input
19” Ready rack mount Installation design
OD-N98ZA Network 8 Zone expander audio terminal
Network Eight Zone Control decorder can work with Universal PA 100V Line amplifier and speakers
8Channel Intelligent contact outputs
Cost effective network PA System Solution
High speed ARM+DSP Processor and display screen to monitor & control
Line output to connect to the external amplifier
The acoustic control to the external amplifier
Maximum capacity to controlled 1000W Power Amplifier
Wide range of network Protocol such as TCP,UDP,IGMP,ICMP,ARP
Multiple options of Audio codec like ADPCM,MP3, MP2, PCM
With a built-in speaker and a microphone; available to make a full duplex talk and a broadcast to other terminals
Supported existing LAN/WAN ethernet system, support over gateway and router
Power up time is <1sec
1x short-circuit output to control 24V forced power supply
19” Ready rack mount Installation design, Anti-corrosion protected Allluminum alloy
OD-N9WAR 20W Network Wall Amplifier
20W Network wall class D amplifier
Built-in Audio Controller with 20Wclass-D amplification with power out 8 Ohms
Installed Microphone on the terminal to enable the monitor on-site activities from main control room
Support LAN/WAN Ethernet system, support over gateway and router
Priority Announcement programming network program, local mic input and local line input
1 Analog Audio output to connect External amplifier
Wide range of network Protocol such as TCP,UDP,IGMP,ICMP,ARP
Multiple options of Audio codec like ADPCM,MP3, MP2, PCM
Built In colorful 3 Line LCD Display, Infrared remote controller
Power up time is <1sec
less emission of the heat and higher efficiency
Wall Mount installation design
OD-N9NSF Network PA System Software
Network PA System Server Software design to Control and manage the Network PA System
With unified managements and settings over all intercom terminals
Display various types of terminal status in real time, such as IP address, volume, task status etc
Configure kinds of terminal parameters Terminal Name right of Broadcasting/Intercom/Monitoring etc
Voice-collecting functions via the sound card to broadcast to terminals in real time
Task management function which can broadcast programs to terminals at a specified time
Provide data interfaces for a workstation
log to write down the calls
Remotely adjust the volume of all the terminals
One server supports 1000 terminals and with options of the clustered server(Maximum:64 pcs)
Supportive of the hot standby
OD-N9RPM Network PA Paging Station
Network Paging Station remote paging solution for Network PA System
All Zone, Group Zone, Individual zone and selected zones paging options
Max support 300 call stations working at simultaneous
Built-in LCD display, power and zone selection
Built-in microphone, monitor speaker for two way intercom use
Eight zone selector, microphone on and number buttons
Nine levels of priority setting in the software
Power up time is <2sec
Aux Input and Output for External devices
OD-N9FI Network Fire Interface Control Unit
32 alarming short circuit inputs and 8 short-circuit outputs
Multiple IP network alarm matrixes can be used to extend the range of the interfaces
Automatically send the alarm signal to the server and broadcast the task programmed in advance
Alarm audio files preserved in the server to save the effort to install the “Alarm Generator”
Support LAN/WAN and Ethernet system, support over gateway and router